Alisply manual

Modular formwork system for the implementation of fair-faced concrete walls, designed to be handled by hand or with a crane. Its resistance and versatility make this product able to solve with its standard elements the best part of the situations that so often arise in building.
CHARACTERISTICS
- Panels weight: 30 Kg/ m2.
- Allowable pressure: 60 kN/ m2 (6.000 kg/m2), complying with the DIN 18202 Standard.
- 2,70 m high modules with only 2 tie rods (Dywidag Bar) in height (0,66 tie rods per m2 of surface).
- The holes for the tie rods are not in the frame, thus improving the finishing and allowing the implementation of stepped walls.
- Protection of the plywood holes with glued PVC plugs.
- Both, the metal frames and the accessories are finished with an electrolytic galvanizing that protects them from corrosion.
ADVANTAGES
- The panels designed with metric modulation allow combining easily horizontal and vertical panels facilitating the setting-out on site.
- Self-aligning panel with an 11 cm edge profile.
- Joint between panels by means of 3 different types of clamps: one wedge type and two manual and quick to place with no need of other tools.
- The clamp can be freely placed at any point of the outer frame, allowing the implementation of battered walls.
- Specially manufactured 12 mm thick phenolic plywood, protected by a 240 gr/m2 melamine layer on its working surface.
- Specific elements for foundations.